200036 GT H3LS

GT H3LS

PrisNOK1 870,00 inkl. mva.
Graveringstekst:
0 / 255 tegn
  • Produktinfo
  • Helle GT
  • Produktanmeldelser (0)
Detaljar GT
Stål Laminert rustfritt trelagsstål - Helle
Bladtjukkelse 3,2 mm
Bladlengde 123 mm
Konstruksjon Stikktange
Skaftmateriale Masurbjørk og framplate i aluminium
Lengde handtak 124 mm
Sliremateriale Ekte vegetabilsk lær
Designer Gunnar Lothe (originaldesign)
Designår 1997

GT har lenge vore ein av våre bestselgande knivar, og variantar av denne kniven har vore i sortimentet vårt sidan 1997. Det er mange gode grunnar til dette, men kanskje den viktigaste er at GT er ein stor kniv, men følest som ein liten kniv på beltet. 

GT ser nemleg ut som ein tungvektar og oppfører seg slik under bruk. Med sine 250 mm lengde og kraftige handtak og fingerstoppar, er dette ein kniv du kan bruke til alt frå slakting til sopplukking. Samstundes bidreg konstruksjonen til fingerstopparen til at den berre veg 150 gram! Med GT får ein med andre ord ein stor kniv med eit breitt blad som likevel ikkje bidreg til auka vekt på tur.

Kniven blir levert med ei slire i ekte brunt lær med ein trykknapp som held kniven trygt på plass.

Helle GT

Helle GT is a knife with a substantial guard. It is a big knife, but the lack of pommel and the use of aluminum for the guard keeps the weight down.

It is an excellent choice for those who like a fairly big knife with a guard. The blade is made of triple laminated stainless steel. The knife comes with a snap type leather sheath.

Maintenance

Helle knives are designed to retain their sharpness as a lifelong outdoors companion. But it is still important to take care of your knife and its sheath.

The Handle. Dry the handle with a soft cloth if wet and wax occasionally.

The Sheath. The leather needs to be impregnated occasionally with colourless impregnation agent (grease or wax) to keep supple. Dry the sheath carefully in room temperature if it becomes wet.

The Blade. Wipe the blade with a soft cloth if wet and treat with grease occasionally.

Sharpening

Use a diamond tool or a wet stone for sharpening. Place the knife bevel flat to the sharpening tool and work the entire blade. Work one side until you can feel a slight burr on the opposite side. Switch side and repeat the procedure until you feel the burr on the first side. You have now established an edge.

Remove the burr by stroking the blade gently over the sharpening surface on both sides, as if cutting very thin slices. Keep the bevel flat towards the sharpener and move from side to side until the burr is gone.

If the blade is very dull or damaged, use a fine-grained grindstone and plenty of water and sharpen until you have a raw edge. Use much cooling liquid and never sharpen on a dry stone. A hot-ground edge looses its heat treatment and ruins the blade.

 

Skriv en produktanmeldelse og del dine erfaringer med dette produktet med andre kunder.