200310 GAUPE H3LS

GAUPE H3LS

PrisNOK1 468,00 inkl. mva.
Graveringstekst:
0 / 255 tegn
  • Produktinfo
  • Gaupe
  • Produktanmeldelser (0)
Detaljar Gaupe
Stål Laminert rustfritt trelagsstål - Helle
Bladtjukkelse 3,1 mm
Bladlengde 107 mm
Konstruksjon Stikktange
Skaftmateriale Masurbjørk
Lengde handtak 115 mm
Sliremateriale Ekte vegetabilsk lær
Designer Helle
Designår 2011

Som dyret kniven er kalla opp etter, tilbyr Gaupe meir enn berre eit flott ytre. Med eit stort og ergonomisk forma heiltreskaft i masurbjørk og eit av dei kraftigaste blada blant Helle sine stikktangmodellar, er dette ein kniv som trivast best i bruk i skog og mark. 

Gaupe er ein kraftig kniv som kan nyttast til alt ein klinka stikktangekniv skal brukast til. Det ergonomiske handtaket gjer at du kan jobbe lenge med den, og trass i størrelsen er dette ein særs god spikkekniv. Lengda på bladet er ideell for det du treng å gjennomføre når du skal slå leir.

Gaupe blir levert med ei slire i vegetabilsk farga svart lær, med eit utskjært gaupepotetrykk som dekorativt element.  

Gaupe

Gaupe is the Norwegian word for Lynx. This all purpose outdoor knife sits comfortable in the hand with a slight finger guard.

It’s triple laminated stainless steel blade offers extraordinary sharpness. The knife sheath is a traditional Scandinavian design with the Lynx footprint as decoration.

Maintenance

Helle knives are designed to retain their sharpness as a lifelong outdoors companion. But it is still important to take care of your knife and its sheath. 

The Handle. Dry the handle with a soft cloth if wet and wax occasionally. 

The Sheath. The leather needs to be impregnated occasionally with colourless impregnation agent (grease or wax) to keep supple. Dry the sheath carefully in room temperature if it becomes wet

The Blade. Wipe the blade with a soft cloth if wet and treat with grease occasionally.

Sharpening

Use a diamond tool or a wet stone for sharpening. Place the knife bevel flat to the sharpening tool and work the entire blade. Work one side until you can feel a slight burr on the opposite side. Switch side and repeat the procedure until you feel the burr on the first side. You have now established an edge. 

Remove the burr by stroking the blade gently over the sharpening surface on both sides, as if cutting very thin slices. Keep the bevel flat towards the sharpener and move from side to side until the burr is gone. 

If the blade is very dull or damaged, use a fine-grained grindstone and plenty of water and sharpen until you have a raw edge. Use much cooling liquid and never sharpen on a dry stone. A hot-ground edge looses its heat treatment and ruins the blade.

 

Skriv en produktanmeldelse og del dine erfaringer med dette produktet med andre kunder.